Mechanical Paver HMP-045

Send Email /SMS Enquiry

Product Description

HMP-045 is a mechanical paver finisher developed to provide better performance at low maintenance cost. HEM-045 offers ease of operating and maintaining it

Smaller, stronger, and economical mechanical paver finisher model HEM-045 comes with mechanical transmission, mechanical drive for conveyor, sliding type control panel, dual operator seats, 2 nos. rear wheels, hydraulically extendable screed with vibration and heating facility.

HEM-045 has basic screed of 2.5 meters width and it is hydraulically extendable up to 4.5 meters. 

There are two optional features available for HSP-045

  • Material Suitability
    • Bituminous Material
    • 2. Bituminous, Wet Mix, GSB, DLC & DBM Material
  • Hydraulic Drive for Conveyor
Key Features:
  • Hydrostatic Transmission
  • Engine Power 105 HP @ 2200 RPM
  • Laying Capacity 100 TPH
  • Hopper Capacity 4.25 CM
  • Paving Width 2.5 m to 4.5 m
  • Weight 9,400 kg
  • Two Wheels on Rear Axle
  • Mechanical Conveyor Drive
  • Double Operator Seat
Technical Information: -
Prime Mover Kirloskar make water-cooled electric start diesel engine, Model 4R 1040TC, 105 HP @ 2200 RPM or equivalent
Power Distribution Gearbox N/A
Material Laying Capacity 100 TPH
Material Laying Thickness 10 mm (Min) to 200 mm (Max)
Transmission MECHANICAL
Conveyor Drive MECHANICAL
Maintenance Shutters On Two sides of machine
Front Wheel Solid Rubber Tyre 2 Nos. 550 Dia. x 175 mm width
Rear Wheel Pneumatic Tyre 4 Nos. Size: 12.00 x 20
Operator Panel Type Sliding Type
Travelling Function Left & Right side
Operating Function Left Side
Operator Seat Double Operator Seat
Machine Steering Hydrostatic steering for effortless operation.
Operation Controls Mechanical Single level control for speed gearing is provided which prevent dual engagement and breaking of gears.
Speed Reduction Gearbox Eight speed reduction gearbox with differential and differential lock arrangement.
Gears / shaft of gear box Made from alloy steel and are hardened and ground for efficient working.
Hopper & Feeding System Hydraulic
Hooper Capacity 6 CM
Auger Screw Dia 250 mm (10”) Ni-Hard / High Chromium Steel Material
Battery 12 V DC
Screed width 2.5 m basic width, Hydraulically extendable up to 4.5 m, further bolt on extension up to 5.5 m.
Screed Heating Yes, with 8 LPG burner facility
Screed Crown -1° / +4°
Screed Vibration Yes (Fix Speed)
Screed Tamping No
Slope & Grade Control Manual
Working Speed 1.27 to 24 meters/min Max
Travelling Speed 16 km/hr (Max.)
Capacity of Tank Fuel: 90 L Hydraulic Oil: 80 L
Weight 10,000 kg. (Approx)
Hopper width Closed : 2.440 m Open : 3.220 m
Machinery Length 5.585 Meter
Machinery Height Working : 3.550 m Compact : 2.800 m
Machinery Accessories 1. Canvas Canopy
2. Working Lights
3. Traveling Lights
4. Tool Kit with Jack
5. Horn
Material Laying Suitability Bitumin Optional: Wetmix, DLC, DBM, GSB
Emission Standard BS-III
Brake Caliper disc brakes on both the side
Traction & Conveyor Pump Motor

Other Products Range

Paver Finisher Machine
Read more...
Emulater Jet Sprayer
Read more...
Fertilizer Drying Drum Machine
Read more...