Sensor Paver (HI-055)

Send Email /SMS Enquiry

HI-055 is indigenously developed and the first wheel mounted hydrostatic paver finisher manufactured by HI-TECH. HI-055 has been gradually revived and upgraded looking over customer’s requirements.

HI-055 has combination of features like hydrostatic transmission, hydraulic drive for conveyor, 4 nos. rear wheels on equalizer beam, sliding type control panel, dual operator seats, hydraulically extendable screed with tamping, vibration and heating facility, and MOBA (Germany) make sensor device for automatic slope & grade control.

In HI-055’s Equalizer Beam feature, the two pairs of wheels are connected with the chassis by means of a pivoted joint, which allows the wheel pair to oscillate independent of each other and the wheels do not loose contact with ground when the surface is uneven. The Equalizer Beam feature averages the unevenness of the ground and provides better finish while paving. It also distributes loads on all the wheels which provides better grip on the ground.

HI-055 has basic screed width of 2.5 meters and it is hydraulically extendable up to 4.5 meters and it can be further extended through bolt on extension up to 5.5 meters.

There are two optional features available for HI-055.

  • Material Suitability
    • Bituminous Material
    • Bituminous, Wet Mix, GSB, DLC & DBM Material
  • Bolt on extensions up to 6.0 meters
Key Features:
  • Hydrostatic Transmission
  • Engine Power 125HP @ 2200 rpm
  • Laying Capacity 300 TPH
  • Hopper Capacity 4.25 CM
  • Paving Width 2.5 mtr to 5.5 mtr
  • Weight 14,300 kg
  • Four Wheels on Rear Axle
  • MOBA (Germany) Make Electronic Sensor
  • Double Operator Seats
Technical Information
Prime Mover Kirloskar make water-cooled electric start diesel engine, Model 4R 1040TC, 105 HP @ 2200 RPM or equivalent
Power Distribution Gearbox Coupled with engine for coupling 3 pump sets.
Material Laying Capacity 300 TPH
Material Laying Thickness 10 mm (Min) to 300 mm (Max)
Transmission Hydrostatic
Conveyor Drive Hydraulic
Maintenance Shutters On three sides of machine
Front Wheel Solid Rubber Tyre 4 Nos. 550 Dia. x 175 mm width
Rear Wheel Pneumatic Tyre 4 Nos. Size: 10.00 x 20
Operator Panel Type Sliding Type
Travelling Function Left & Right side
Operating Function Left & Right Side
Operator Seat Double Operator Seat
Machine Steering Hydrostatic steering for effortless operation.
Operation Controls Using Simple Switches
Speed Reduction Gearbox Speed reduction gearbox to achieve low speed for paving and high speed for traveling.
Gears / shaft of gear box Made from alloy steel and are hardened and ground for efficient working.
Hopper & Feeding System Hydraulic
Hooper Capacity 4.25 CM
Auger Screw Dia 350 mm
Battery 12 V DC
Screed width 2.5 m basic width, Hydraulically extendable up to 4.5 m, further bolt on extension up to 5.5 m.
Screed Heating Yes, with 8 LPG burner facility
Screed Crown -1° / +4°
Screed Vibration Yes,infinitely variable upto 50.00 Hz (Max.) 
Screed Tamping No,infinitely variable 33.33 Hz (Max.)
Slope & Grade Control Auto & Manual mode, Electronic sensor of MOBA, Germany make
Working Speed 0 to 30 meters/min Max
Travelling Speed 0 to 16 km/hr Max
Capacity of Tank Fuel: 180 L Hydraulic Oil: 310 L
Weight 14,300 kg. (Approx)
Hopper width Closed : 2.440 m Open : 3.220 m
Machinery Length 6.670 m
Machinery Height Working: 3.470 m Compact: 2.900m
Machinery Accessories 1. Canvas Canopy
2. Working Lights
3. Traveling Lights
4. Tool Kit with Jack
5. Horn
Material Laying Suitability Bitumin Optional: Wetmix, DLC, DBM, GSB
Emission Standard BS-III
Brake Caliper disc brakes on both the side
Traction & Conveyor Pump Motor Danfoss (Germany make) or equivalent

Other Products Range

Emulater Jet Sprayer
Read more...
Mechanical Paver HMP-045
Read more...
Control Panel
Read more...