Sensor Paver (HSP-045)

Send Email /SMS Enquiry

Product Description

HSP-045 is a wheel mounted sensor paver finisher for those who want better performance compare to mechanical pavers at a very economical rate. HSP-045 offers ease of operating and maintaining it.

Smaller, stronger, and economical sensor paver finisher model HSP-045 comes with hydrostatic transmission, hydraulic drive for conveyor, sliding type control panel, dual operator seats, 2 nos. rear wheels, hydraulically extendable screed with vibration and heating facility, and MOBA (Germany) make sensor device

HSP-045 has basic screed of 2.5 meters width and it is hydraulically extendable up to 4.5 meters 

There are two optional features available for HSP-045

  • Material Suitability
    • Bituminous Material
    • Bituminous, Wet Mix, GSB, DLC & DBM Material
  • Bolt on extensions up to 6.0 meters
Key Features:
  • Hydrostatic Transmission
  • Engine Power 105 HP @ 2200 RPM
  • Laying Capacity 200 TPH
  • Hopper Capacity 4.25 CM
  • Paving Width 2.5 m to 4.5 m
  • Weight 11,300 kg
  • Two Wheels on Rear Axle
  • MOBA (Germany) Make Electronic Sensor
  • Double Operator Seat
Technical Information: -
Prime Mover Kirloskar make water-cooled electric start diesel engine, Model 4R 1040TC, 105 HP @ 2200 RPM or equivalent
Power Distribution Gearbox Coupled with engine for coupling 3 pump sets.
Material Laying Capacity 200 TPH
Material Laying Thickness 10 mm (Min) to 200 mm (Max)
Transmission Hydrostatic
Conveyor Drive Hydraulic
Maintenance Shutters On three sides of machine
Front Wheel Solid Rubber Tyre 4 Nos. 550 Dia. x 175 mm width
Rear Wheel Pneumatic Tyre 4 Nos. Size: 12.00 x 20
Operator Panel Type Sliding Type
Travelling Function Left & Right side
Operating Function Left & Right Side
Operator Seat Double Operator Seat
Machine Steering Hydrostatic steering for effortless operation.
Operation Controls Using Simple Switches
Speed Reduction Gearbox Speed reduction gearbox to achieve low speed for paving and high speed for traveling.
Gears / shaft of gear box Made from alloy steel and are hardened and ground for efficient working.
Hopper & Feeding System Hydraulic
Hooper Capacity 4.25 CM
Auger Screw Dia 250 mm (10”) Ni-Hard / High Chromium Steel Material
Battery 12 V DC
Screed width 2.5 m basic width, Hydraulically extendable up to 4.5 m, further bolt on extension up to 5.5 m.
Screed Heating Yes, with 8 LPG burner facility
Screed Crown -1° / +4°
Screed Vibration Yes (Fix Speed)
Screed Tamping No (Available on request)
Slope & Grade Control Auto & Manual mode, Electronic sensor of MOBA, Germany make
Working Speed 0 to 30 meters/min Max
Travelling Speed 0 to 16 km/hr Max
Capacity of Tank Fuel: 180 L Hydraulic Oil: 280 L
Weight 11,300 kg. (Approx)
Hopper width Closed : 2.440 m Open : 3.220 m
Machinery Length 5.53 Meter
Machinery Height Working : 3.550 m Compact : 2.800 m
Machinery Accessories 1. Canvas Canopy
2. Working Lights
3. Traveling Lights
4. Tool Kit with Jack
5. Horn
Material Laying Suitability Bitumin
Emission Standard BS-III
Brake Caliper disc brakes on both the side
Traction & Conveyor Pump Motor Danfoss (Germany make) or equivalent

Other Products Range

Emulater Jet Sprayer
Read more...
Sensor Paver (HI-055)
Read more...
Control Panel
Read more...